Tire Changer Unit

 


Up

Fenner AC-10TC Tire Changer Power Unit

This power unit is designed for smaller, low-rise auto hoists and can be mounted either horizontally or vertically, operating on 115VAC power.

A push button on the motor starts the unit to raise the vehicle on the lift. To lower, a manually operated cartridge-style release valve is used for finger-tip control of lowering speed.

AC-10TCLayout.JPG (353271 bytes)

UNIT SPECIFICATIONS
MOTOR 115 VAC 1/2HP 3450RPM 1PH 60Hz. Intermittent Duty TENV CWDE Rotation
PUMP AFC 0.049 cu. in./rev. (0.8 cc/rev)
RELIEF Fixed at 2300PSI nominal (156 bar)
ENDHEAD 9/16-18 SAE pressure-return port "N1" endhead to 56-frame motor adaptor
TANK 1.5 US gallon (5.7 litres) horizontal or vertical (tank down) mounting
VALVING Check valve (cartridge-style) manual release valve (cartridge-style)

AC-10TCCircuit.JPG (127114 bytes)