Bale Spike Unit

 


Up

Fenner DC-70BS Bale Spike Power Unit

This power unit is designed primarily to operate tines (or "spikes") which pick up round bales and allow these to be hauled by a pickup truck, tractor or other vehicle.

The unit incorporates a 2-position, 4-way cartridge valve and double pilot-operated checks to control a double acting cylinder, to lift, hold, and then lower (under power) the round bale.

It may also be used to power any double-acting, intermittent duty application.

DC-70BSLayout.JPG (148442 bytes)

UNIT SPECIFICATION
MOTOR 12 volt DC standard duty 1-terminal corrosion-resistant plate finish
PUMP AFC 0.122 cu.in./rev (2.0 cc/rev)
RELIEF Adjustable set at 2500PSI (170 bar)
ENDHEAD 9/16-18 SAE ports 'A' & 'B'
(2) 3/8-16 TAP x 0.38 mounting holes
TANK 3 quart (2.8 litres) horizontal mounting
VALVING 2-position, 4-way solenoid operated cartridge valve with double P.O. checks & 9/16 SAE prots

DC-70BSCircuit.JPG (38687 bytes)