Man Lift Unit

 


Up

Fenner AC-20ML Man Lift Power Unit

This power unit is designed for use on elevated work platforms using a raise-hold and gravity lower circuit. The following additional features are included:

bulletNormally open valve to protect operators from run-on in case of motor contactor failure.
bulletManual override to allow the platform to be lowered in case of power failure.
bulletElectronic load delay for reliable operation in 50Hz. and degraded voltage areas.

AC-20MLLayout.JPG (106885 bytes)

UNIT SPECIFICATION
MOTOR 115/230 VAC 1HP 3450RPM 50/60Hz 1PH 56-frame intermediate duty TENV CWDE rotation
PUMP AFC 0.061 cu.in/rev (1.0 cc/rev)
RELIEF Adjustable set at 2500 PSI (170 bar)
ENDHEAD 9/16-18 SAE pressure-return port
9/16-18 SAE auxilary return port (plugged)
TANK 1.0 US gallon (3.8 litres) horizontal-vertical mounting
VALVING Check valve 115VAC N.O. 2-way valve 115VAC N.C. valve with manual override

AC-20MLCircuit.JPG (43810 bytes)