Snow Plow Unit

 


Up

SPX DC-80SP Snow Plow Power Unit

This power unit is designed to operate all functions of a power angling snow plow. The unit includes a lift-hold-lower function for the blade, with a continuous "float" capability. A directional valve controls angling of the blade, two cross-over reliefs protect the system from damage should the blade be obstructed while plowing.

DC-80SPLayout.JPG (155174 bytes)

UNIT SPECIFICATION
MOTOR 12 volt DC 1 terminal standard duty corrosion-resistant plate finish
PUMP AFC 0.098 cu.in./rev (1.6 cc/rev)
RELIEF Adjustable relief valve set at 2000PSI (135 bar)
ENDHEAD 9/16-18 SAE ports A, B & C (on valve)
(2) 3/8-16 tap x 0.38 deep mounting holes
TANK 1.5 quart (1.4 litres) horizontal mounting
VALVING 3-position, 4-way solenoid operated directional control valve with (2) 12 volt DC solenoids
9/16 SAE ports 'A' and 'B"
and 9/16 SAE power beyond port 'C'
Cross over relief valves set at 1500PSI

DC-80SPCircuit.JPG (45278 bytes)